 |
 |
 |
|||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Cementitious
- Cement-based
powders etc. |
|
A
non-shrink, pumpable,thixotropic,high performance,cement-based
grout suitable for injection.
|
|
General
purpose non-shrink cementitious grout.
|
|
High
flow, non-shrink cementitious grout.
|
|
High
strength non-shrink cementitious grout (underwater applications).
|
|
Non-shrink
cementitious aggregate-filled grout.
|
|
Cementitious
fibre & polymer modified re-profiling and protective mortar.
|
|
General
purpose cementitious repair mortar.
|
|
High
build polymer modified cementitious repair mortar.
|
|
High
performance light weight polymer modified cementitious repair
material .
|
|
High
performance medium weight polymer modified cementitious repair
material.
|
|
Shrinkage
compensated micro concrete.
|
|
High
performance shrinkage compensated micro concrete.
|
|
High
strength polymer modified cementitious repair material.
|
|
Fast
setting cementitious horizontal repair compound.
|
|
Cementitious
pavement repair compound.
|
|
2-component
thin layer waterproofing, smoothing coat and bonding primer.
|
|
2-component
cementitious fibre reinforced polymermodified repair mortar.
|
|
2-component
cementitious high build polymer-modified repair mortar.
|
|
Two
component polymer modified cementitious waterproof mortar.
|
|
1-component,
flowable, general purpose, cementitious grout.
|
|
1-component,
high flow, shrinkage compensated cementitious grout |
|
Medium
strength (40 MPa) thixotropic mortar for the repair of concrete.
|
|
Sulphate-resistant
thixotropic fibre-reinforced mortar for the repair of concrete.
|
|
Controlled-shrinkage,
fibre-reinforced mortar, with rapid setting and hardening for
the repair of concrete.
|
|
Single-component
cement based mortar with normal setting for smoothing concrete.
|
|
Specially
designed cement which sets quickly in approximately 20 minutes
enabling fast repairs & fixing etc. |
|
Ready
mixed,ready-to-use,finely ground putty substance which dries
rock hard when exposed to heat.
|
|
Epoxy
Resin - High
strength, fast-setting resins based on epoxy. Thermosetting resin: used chiefly in strong adhesives and coatings and laminates. |
|
Unique, self-contained, easy to use brickwork repair system. |
|
2 component solvent free, cold cure, thixotropic epoxy adhesive. |
|
2 component, solvent free, cold cure, thixotropic epoxy adhesive, rapid cure. |
|
2 component, solvent free, cold cured
epoxy bonding agent. |
|
3-part, high performance epoxy grouting system |
|
3 component, solvent free, cold cured
epoxy bonding agent. |
|
3 component solvent free, rapid curing, high strength epoxy pourable grout. |
|
3 component solvent free lightweight epoxy based repair mortar. |
|
3 component solvent free, low viscosity, epoxy resin. |
|
A
2-part, high strength, fast curing, thixotropic grout / adhesive
in a single cartridge.
|
|
3-part g.p. epoxy mortar that makes easy & permanent
repairs to damaged concrete, screeds, brick,etc.
|
|
Concrete
bonding agent for bonding new cementitious materials to exisiting
cementitious surfaces.
|
|
Concrete
bonding agent for bonding new cementitious materials to exisiting
cementitious surfaces.
|
|
High
strength, abrasion-resistant epoxy reinstatement mortar for
the fast and permanent reinstatement of concrete,
|
|
High
build epoxy reinstatement mortar for the fast and permanent
reinstatement of concrete.
|
|
A
low viscosity system for the injection of cracks between 0.25
mm and 9 mm wide in concrete and masonry.
|
|
Developed
for the injection of cracks 0.5 to 9 mm wide in concrete and
masonry.
|
|
Provides
effective and leak-free dispensing.
|
|
For
use with Nitofill LV & TH products.
|
|
Epoxy
crack injection system (thixotropic) Can be injected into open
ended cracks.
|
|
A
low viscosity system suitable for cracks down to 0.2
mm at the surface & internal cracks tapering down.
|
|
Includes
goggles, skeleton gun, surface sealant, empty mixing tub.
|
|
For
use with both Nitokit LV and TH.
|
|
For
use with Nitokit TH.
|
|
For
use with Nitokit LV. |
|
For
use with both Nitokit Th & LV. |
|
Free-flow grouts for use in situations where heavy dynamic or mobile loads are encountered. |
|
Free-flow grouts for use in situations where heavy dynamic or mobile loads are encountered. |
|
Polyester
Resin - Resins
that have high strength and excellent resistance to moisture
and chemicals when cured. A thermosetting or thermoplastic synthetic resin made by esterification of polybasic organic acids with polyhydric acids |
|
High
strength jointing and multi-purpose repair compounds. |
|
High
strength jointing and multi-purpose repair compounds (special
grade allowing users to add suitable aggregate) |
|
Purable
grade used where hole is 8 to 40mm greater in diameter than
the bar. |
|
High
strength anchoring grout for horizontal and vetical use.Pumpable
grade. |
|
High strength, fast curing,thixotropic grout/adhesive cartridge. |
|
Single
cartridge, 2-component fast curing polyester anchoring adhesive |
|
Additives - Products
used for adding to other materials. |
|
Low
viscosity hydrocarbon carrier blended with a chemically active
agent. |
|
Plasticised
expanding grout admixture. |
|
Normal setting special hydraulic binder with rapid drying (7
days) |
|
One
component water based styrene acrylate polymer admixture. |
|
One
component water based general purpose styrene butadene rubber
emulsion. |
|
A
patented one component water based blend of modified SBR emulsion,
plasticisers and silica fume. |
|
Surfactant
based liquid admixture for modifying mortar to improve plasticity
without the addition of lime. |
|
Super
concentrated mortar plasticiser
that will plasticise 100 x 25kg of cement. |
|
1-shot concentrated waterproofing plasticiser that will waterproof 40 x 25kg of cement. |
|
Liquid produces
a permanent colour in concrete, mortars, floors & renders
for bricklaying etc. |
|
Powder produces
a permanent colour in concrete, mortars, floors and renders
for bricklaying etc. |
|
Chloride
Free rapid hardener liquid additive designed to accelerate setting/hardening times of mortar etc. |
|
Other - Products
not catagorized by material or an 'unusual application'. |
|
High
modulus MS Polymer based sealant and adhesive for building and
civil engineering structures. |
|
Low
modulus MS Polymer based, non staining joint sealant designed
for use on prestige buildings.. |
|
Two
part self mixing, ultra fast curing MS polymer based sealant
for floor and wall joints. |
|
| Seals,bonds & fixes glass,plastic,wood,stone,concrete,metal,plasterboard,tiles,brick & most building materials. | |
Seals,bonds & fixes glass,plastic,wood,stone,concrete,metal,plasterboard,tiles,brick & most building materials. |
|
Controlled-shrinkage
fibre-reinforced grout for the repair of concrete. |
|
Pigmented
primer on a water emulsifiable epoxy resin base with a wide
application spectrum. |
|
Heavily
loadable,self-flowing,floor levelling compound for indoors
and outdoors. |
|
Fast
setting multi-talent for repairing concrete in just a few hours. |
|
The
8mm or 10mm diameter Grade 304 austenitic stainless steel tie
is combined with Structural XL grout. |
|
Available
in 6,8mm dia. or 10metre coil,the bar acts as
a strong coiled spring within its linear elastic range. |
|
Pinning
nozzle, tool for use with the
above products. |
|
Bowflex power support tool for use with the
above products. |
|
Spare pinning nozzle clamps. |
|
 |
Unit 4, Chingford Industrial Centre, Hall Lane, London E4 8DJ | T: 020 8524 1931 | F: 020 8529 0103 | E: info@ countyconchem.co.uk home | about us | products | colours | data/h&s | counter | delivery | contact us | returns | terms & conditions |